Cohesive Zone Impact Analysis of Structural Adhesive Joints
Şu kitabın bölümü:
Çakoğlu,
A.
H.
&
Sancar,
M.
R.
(eds.)
2023.
Mühendislik ve Uygulamalı Bilimlere Çok Yönlü Yaklaşımlar: Malzemeler ve Yöntemler.
Özet
Understand the behaviour of a joint under dynamic loads is a hot topic in the research community. This work studies numerically and experimentally the effect of the adhesive type and overlap length (LO) on the strength of adhesively bonded single lap joints (SLJ) under impact loads. Araldite® AV138 and Sikaforce® 7752, two adhesives with different ductility were used to bond unidirectional composite adherends. Drop weight tests were performed and simulated using a cohesive zone model (CZM) approach. It was concluded that increasing the LO increases the joint strength. This effect is more notorious in joints with more flexible adhesives.
Anahtar Kelimeler:
Kaynakça Gösterimi
Lisans
Bu çalışma Creative Commons Attribution 4.0 International License ile lisanslanmıştır.
Yayın Tarihi
DOI
Kategoriler
Telif Hakkı (c) 2023 Arif Hikmet Çakoğlu, Muhammet Raşit Sancar; Muhammet Raşit Sancar, Elif Çil, Muhammet Raşit Sancar, Şilan Baturay, Canan Aytuğ Ava, R Ramesh, S Seenivasan, Ebru Karataş, Fehiman Çimer, Bahar Yılmaz, Luís M.C. Peres, Raul D.S.G Campilho, Ricardo J.B. Rocha, Isidro J. Sánchez-Arce, Raul D.F Moreira, Marcelo M.F.O Rosas