Composite Materials with Different Engineering Approaches III

Murat Yazıcı; Yalçın Boztoprak; Süleyman Serdar Pazarlıoğlu; Ferhat Bülbül; Selçuk Avcı; Süleyman Serdar Pazarlıoğlu; Anıl Zorlu; Ebru Sumen; Hasan Gökçe; Eslem Şahin; Yalçın Boztoprak; Murat Yazıcı; Oğuzhan Taş; Aslıhan Hayırkuş; Adem Onat; Harun Güçlü; Emir Eminoğlu

doi:10.58830/ozgur.pub251

Effect of Calcium Fluoride Addition to Sheep Hydroxyapatite-Alumina Composite
Chapter from the book: Yazıcı, M. & Boztoprak, Y. & Pazarlıoğlu, S. S. (eds.) 2023. Composite Materials with Different Engineering Approaches III.

Return to Book

Süleyman Serdar Pazarlıoğlu

Marmara University

Anıl Zorlu

Downloads

Read Chapter Download

Synopsis

In this study, the effects of calcium fluoride (CaF₂) addition, in the range of 0.5-2.5% by weight, on the sheep hydroxyapatite-2.5% alumina (KHA-2.5A) binary system were examined. It was determined that the highest density (from 2.990±0.003 to 2.995±0.064 g/cm³), partial density (from %94.294±0.125 to %94.546±1.020), hardness ( from 4.437±0.292 GPa to 4.638±0.251 GPa), fracture toughness (from 1.709±0.154 MPam^1/2 to 1.832±0.277 MPam^1/2) and compressive strength (from 207.85±5.859 MPa to 231.64±5.394 MPa) properties obtained in the KHA-2.5A binary system could be increased by increasing the addition of CaF₂.

Keywords:

Composite materials Fiber reinforced composites Ceramic matrix composites Nanocomposite Mechanical Properties

How to cite this book

Pazarlıoğlu, S. S. & Zorlu, A. (2023). Effect of Calcium Fluoride Addition to Sheep Hydroxyapatite-Alumina Composite. In: Yazıcı, M. & Boztoprak, Y. & Pazarlıoğlu, S. S. (eds.), Composite Materials with Different Engineering Approaches III. Özgür Publications. DOI: https://doi.org/10.58830/ozgur.pub251.c1221

License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Published

October 21, 2023

DOI

https://doi.org/10.58830/ozgur.pub251.c1221

Effect of Calcium Fluoride Addition to Sheep Hydroxyapatite-Alumina Composite Chapter from the book: Yazıcı, M. & Boztoprak, Y. & Pazarlıoğlu, S. S. (eds.) 2023. Composite Materials with Different Engineering Approaches III.